Checking Battery Power; Power Management; Low Battery Capacity - Symbol PDT 8000 Series Product Reference Manual

Checking Battery Power

To check whether the main battery or backup battery in the terminal is charged, tap Start -
Settings - System - Power to display the following Battery Status screen.
To save battery power, set your terminal to turn off after a specified number of minutes on
battery power.

Power Management

When using the GPRS/GSM modem to establish a GPRS/GSM connection (see
10, Wireless Wide Area Network
result in the system or serial driver removing power from the modem asynchronously from
the application.

Low Battery Capacity

After the modem has been powered up, power will be removed from the modem when the
battery reaches a low capacity threshold, before the critical low battery event.
The minimal operating battery capacity values will be kept in a registry key. This value will
be expressed in battery capacity percent.
;
; Minimal Battery Capacity to Allow G18 Operation Expressed in % of capacity
; G18 is shut off when battery capacity falls below this value
;
"MinG18OperationalCapacity"=dword:14
Figure 1-20. Battery Status Screen
Configuration), there are three power conditions that
;0x14 = 20%
Getting Started
Chapter
1-35