Ericsson iPECS LIP-8002E User Manual page 268

LIP-8040E Gigabit Phone
To make a page:
•
Lift the handset,
•
Dial the desired Page zone,
•
If assigned, after page warning tone, make announcement.
To queue for a page when busy is received(iPECS-LIK & SBG):
•
Press the MSG button,
•
Replace the handset returning to idle.
To answer a Meet-me-Page:
•
Lift the handset.
•
Dial 544(iPECS-LIK)/511(iPECS SBG-1000)/546(iPECS-MG)
(Meet-Me-Page code).
8.5 Push-To-Talk (PTT) Page
To log-in to a PTT group:
•
Dial #0(iPECS-LIK)/538(iPECS-MG),
•
Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
•
Dial #0(iPECS-LIK)/538(iPECS-MG), the PTT Log-in/out code,
•
Press the * key.
To place a page announcement to the active PTT group:
•
Press and hold the
•
After confirmation tone, make page announcement.
If the desired Page Zone is busy, the User can elect to
be recalled when their turn comes in the queue. Users
can also request a paged party answer the Page using
Meet-Me Paging. In this case, the paged party may
answer the page from any phone in the system by
dialing the Meet-Me code.
iPECS Phones can be assigned as a member of one or
more of the system's nine Push-To-Talk (PTT) page
groups. Users separately log-in or log-out of any one or
all PTT groups to which the phone is assigned. Once
logged in, place
announcements to/from other users who are logged in
to the same PTT group.
Flex button,
PTT
60
or receive one-way
User Guide
page