LIP-8002E/2AE
4.4 Call Park: Placing a call on hold to Page
In iPECS-LIK, iPECS SBG-1000
To park an active external call:
•
•
•
To retrieve a parked call:
•
•
In iPECS-MG
To park an active external call:
•
•
•
•
To retrieve a parked call:
•
•
•
A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with
Call Park.
Parked calls are subject to
Park timer.
Press
/
TRANS
PGM
Dial the Call Park Location code,
Return to idle.
Lift the handset,
Dial the Call Park Location code.
Press
/
TRANS
PGM
Dial the Park Orbit (541),
Dial the Park number (00~49)
Return to idle.
Lift the handset,
Dial the Park Orbit (541),
Dial the Park number (00~49).
Paging
,
,
28
to notify the desired User of
Hold Recall
after the Call
User Guide