Ericsson iPECS LIP-8002E User Manual page 274

LIP-8040E Gigabit Phone
To activate Keypad Facility operation:
•
Press the programmed
keypad mode,
•
Dial as desired.
To deactivate Keypad Facility operation:
•
Press
OR
•
Press a Feature or Flex button.
While on an ISDN CO line, to access ISDN Supplementary services:
•
Press Flash,
•
Press H
desired feature.
To restrict Caller ID:
•
Lift the handset,
•
Press programmed CLIR/COLR button to place call.
KEYPAD FACILITY
9.2.2 Using ISDN Supplementary Services
ISDN service providers may incorporate features similar
to those of Centrex.
services are provided on a subscription basis, and as
with Centrex, are accessed using the
iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button.
conference can be established using the Flash and Conf
Soft buttons. A conference can also be placed on hold.
/S , Conf, or CO line button to activate the
OLD AVE
9.2.3 Activating ISDN Caller ID Restriction
iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier.
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
KEYPAD FACILITY
,
These ISDN Supplementary
66
button to switch to
Flash button on an
An ISDN line
Separate Flex buttons are
User Guide