Using The Speakerphone - Ericsson iPECS LIP-8002E User Manual

LIP-8040E Gigabit Phone
In iPECS SBG-1000
To access the Attendant menu:
•
•
•
•
2.3

Using the Speakerphone

From the Attendant Station phone, press the M
button,
Press 0 (Attendant); the following will display:
SELECT (1 - 2)
1. SET ICM ONLY MODE
2. RESTORE COS
BACK
Set ICM Only Mode—Dial the Station Range for ICM
only calls (ex., 103-108=103108), and press the OK
Soft button.
Restore COS—Dial the Station Range for COS
restoring (ex., 103-108=103108), and press the OK
Activate the iPECS Speakerphone at any time (except
for Paging) in place of lifting the handset to receive or
place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the Group Listen feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local 'group' to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone, Mute
the microphone using the M
active, the M
off Mute, press the M
With Auto Speaker Select, activating or accessing a
feature by pressing its button will activate the
Speakerphone automatically.
OK
UTE
button LED will be illuminated. To turn
UTE
button again.
UTE
16
User Guide
ENU
button. When Mute is