External Calls; External Calls; Placing External Co/Voip Calls; Leaving A Message Wait - Ericsson iPECS LIP-8002E User Manual

LIP-8040E Gigabit Phone
To Camp-On (wait off-hook) for a busy station:
•
Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:
•
Press the MSG button and hang-up.
To make a Voice Over announcement to a busy station:
•
Dial #,
•
After the Splash tone is heard, begin speaking.
To activate Message Waiting:
•
When calling a number that is busy or in DND mode, press the
MSG button and hang-up.
4.2

External Calls

your Station; after you answer the callback, the system
will call the previously busy station.
If you are the Attendant or Secretary, you may activate
Intrusion. You may also use Step Call; dial the next
station by dialing the last digit of the Intercom number.
4.1.2

Leaving a Message Wait

If the called user does not answer or is in DND mode,
you may leave a Message Wait. The called user will
receive a Message Wait indication; the message icon
will be displayed. If the ring/message LED is set to
Message Wait Indication, the ring/message LED will
flash.
4.2.1

Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These 'lines'
are accessed either using a button on the iPECS Phone
assigned as a CO/IP line or using dial codes.
CO/IP lines are grouped for different types of calls, local,
long distance, etc. Using the CO/IP line group code,
you will be able to access any line from the group. A
Flex button on the iPECS Phone assigned as a
button lets you access a line from a group. Dial codes
for access to CO/IP lines are:
Individual CO/IP line access—
33
User Guide
The
LOOP