LIP-8040E Gigabit Phone
To configure VPN:
In Network Config. Menu, use VOL buttons to locate the DNS
Address menu.
Enter DNS address in DNS ADDRESS menu
Use VOL buttons to locate the VPN configuration screen
(shown),
Enable in VPN Menu and press the Hold button.
Following steps are available when VPN is enabled.
Enter VPN Server address in VPN SERVER IP menu and press the
Hold button.
Enter TCP/UDP port number for both local and remote in VPN PORT
and press the Hold button. The default value is 1194.
In VPN USER ID, enter ID and press the Hold button.
In VPN USER PASSWORD, enter Password and press the Hold
button.
To set default Config. settings:
In Network Config. Menu, use VOL buttons to locate the
Default Config. Screen (shown),
Press the * key.
To exit Config. settings:
Press the S
Press the * key to exit,
OR
Press the # key to Reset/Reboot the phone with new setting.
VPN ?
[ENABLED] – CHANGE[#]
SET DEFAULT CONFIG(DOT:*)
button,
PEAKER
14
User Guide