Ericsson iPECS LIP-8002E User Manual page 181

LIP-8012E & LIP-8024E Gigabit Phone
To select a CO Code:
•
From the Call Log, use the right Navigation key, to advance to
the next 3 Soft button items,
•
Press the CO CODE Soft button (code displaying the + symbol
is the currently selected item),
•
To edit the CO code (positions 2-5 only):
•
Use Navigation up/down buttons to highlight the desired item,
•
Press the Edit Soft button to modify selection.
To select the CO code:
•
Use Navigation up/down buttons to highlight the desired item,
•
Press the Select Soft button.
The first CO code is sent from the system in the saved
call log. Normally the first CO code is '9', but if the
telephone number is equal to a number in the Speed
Dial list, the first CO code will be the access code of the
saved CO line of the speed dial. Therefore the first CO
code of each call log can be different and is not be
editable.
CO Codes 2 - 5 are the user-defined codes. If a code 2
- is selected, the selected code will be used in placing
all of the external calls in the call log.
01. ▶ CO1 01112345678
02. ◀ 101
03. CO2 LEE K D
•
DEL CO CODE
1. +88001
2.
•
3.
•
BACK
SELECT
55
EDIT
User Guide