Ericsson iPECS LIP-8002E User Manual page 265

LIP-8040E Gigabit Phone
To save an external call to the Station Speed dial:
•
•
•
To select a CO Code:
•
•
Use Navigation up/down buttons to highlight the
desired external call item,
Press the Select Soft button,
Press the Save Soft button.
The CO code in a log item is used to seize the co line
when placing an external call using the call log. Up to 5
CO codes can be saved.
The first CO code is sent from the system in the saved
call log. Normally the first CO code is '9', but if the
telephone number is equal to a number in the Speed
Dial list, the first CO code will be the access code of the
saved CO line of the speed dial. Therefore the first CO
code of each call log can be different and is not be
editable.
CO Codes 2 - 5 are the user-defined codes. If a code 2 -
is selected, the selected code will be used in placing all
of the external calls in the call log.
From the Call Log, use the right Navigation key, to
advance to the next 3 Soft button items,
01. ▶ CO1 01112345678
02. ◀ 101
03.
04. ▶ KIM M J
05.
DEL
Press the CO CODE Soft button (code displaying the +
symbol is the currently selected item),
1. +88001
2.
3.
4.
5.
BACK
CO2 LEE K D
103
CO CODE
EDIT SELECT
57
User Guide