Push-To-Talk (Ptt) Page; Wake-Up Alarm - Ericsson iPECS LIP-8002E User Manual

LIP-8012E & LIP-8024E Gigabit Phone
8.5

Push-To-Talk (PTT) Page

To log-in to a PTT group:
•
Dial #0(iPECS-LIK)/538(iPECS-MG),
•
Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
•
Dial #0(iPECS-LIK)/538(iPECS-MG), the PTT Log-in/out code,
•
Press the * key.
To place a page announcement to the active PTT group:
•
Press and hold the
•
After confirmation tone, make page announcement.
8.6

Wake-Up Alarm

To set the Wake Up Alarm clock:
•
Press
•
Dial 41(iPECS-LIK)/21(iPECS SBG-1000)/13(iPECS-MG)
(Alarm Clock code),
•
Dial 2-digit hour and minute for alerting,
•
For a daily (repeating alarm), press #,
•
Press
To erase Wake-Up:
•
Press
•
Dial 42(iPECS-LIK)/22(iPECS SBG-1000)/14(iPECS-MG)
(Alarm Clock delete code),
•
Press
iPECS Phones can be assigned as a member of one or
more of the system's nine Push-To-Talk (PTT) page
groups. Users separately log-in or log-out of any one or
all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page
announcements to/from other users who are logged in
to the same PTT group.
PTT
iPECS supports an Alarm clock for each station in the
system. The alarm clock can be set to repeat daily or
as a one-time alarm.
When responding to the alarm by lifting the handset,
BGM or Wake-Up Alarm announcement (iPECS-LIK &
iPECS SBG-1000) will be provided.
/ ,
TRANS PGM
.
/
HOLD SAVE
/ ,
TRANS PGM
/ .
HOLD SAVE
Flex button,
58
User Guide