Ericsson iPECS LIP-8002E User Manual page 255

LIP-8040E Gigabit Phone
In iPECS-MG
To set-up a Conference Room:
•
Press the
•
Dial 54 to create a Conference Room,
•
Dial the desired Conference Room number (571-579),
•
If desired enter a password for the Conference Room (up to 12
digits),
•
Press
To join a Conference Room:
•
Lift the handset,
•
Dial 571-579 (Conference Room entry code),
•
Dial the Conference Room password.
To delete a Conference Room:
•
Press the
•
Dial 55 (Conference Room delete code),
•
Dial the Conference Room number (571-579),
•
Dial the Conference Room password,
•
Press
5.5 Call Park: Placing a call on Hold to Page
In iPECS-LIK, iPECS SBG-1000
To park an active external call:
•
Press
•
Dial the Park Orbit (601-610 for iPECS SBG-1000 & 50 & 100,
or 601-619 for iPECS-300 & 600 or 601-800 for iPECS-1200),
•
Return to idle.
To retrieve a parked call:
•
Lift the handset,
•
Dial the Park Orbit.
/ button,
TRANS PGM
/ to establish the Room.
HOLD SAVE
/ button,
TRANS PGM
/ to delete the Conference Room.
HOLD SAVE
A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with
a parked call.
Parked calls are subject to
Park timer.
/ ,
TRANS PGM
Paging to notify the desired user of
Hold Recall
47
User Guide
after the Call