Ericsson iPECS LIP-8002E User Manual page 218

LIP-8040E Gigabit Phone
•
Station Name Program—Input up to 12 digits using the keypad
(press DND button to backspace/delete a character), then press
the OK Soft button. To input characters:
•
ICM Ring/CO Ring—Use Next Soft button to move through list
of ring types, and press OK Soft button to select.
•
Password Program—Enter the current password and press the
OK Soft button, then enter the new password and press the OK
Soft button.
•
Language Program—Use Navigation up/down buttons to
highlight available languages supported, and press OK Soft
button to select.
•
Station Ring Download—Select the ring position (5-8) and
select the ring file; press the SAVE Soft button to select.
•
Backlight—Use Navigation up/down buttons to select the
operation of the backlight, and press the OK Soft button to
select.
•
Font Program— Use Navigation up/down buttons to select the
LCD Font, and press the OK Soft button to select.
In iPECS-MG
•
Set Font Type—Select the font type(0 for new roman, 1 for
gothic), and press the OK Soft button to select.
•
Set Contrast—Press the VOL   buttons or Use Navigation
up/down buttons to adjust the brightness, then press the OK
Soft button to select.
Press the second Soft button to select ABC> or abc>
o
mode,
To input the first character of a button, press the
o
button 1 time (ex., for 'a', press 2 button once),
To input the second character of a button, press the
o
button 2 times (ex., for 'b', press the 2 button twice.
To input the third character of a button, press the
o
button 3 times (ex., for 'f', press the 3 button three
times.
10
User Guide