Ericsson iPECS LIP-8002E User Manual page 23

LIP-8002E/2AE
To place an external call:
•
•
•
To activate a queue if the selected/dialed line is busy:
•
•
•
In iPECS-LIK
To enter an Account Code before the call:
•
•
•
•
•
To enter an Account Code during a call:
•
•
•
Lift the Handset,
Dial the CO access code,
Dial the desired number.
3.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you
will receive an All Trunks Busy signal. You may request
to be notified when a line becomes free.
Select/dial a busy CO/IP line,
Press the
CALL BACK
Return to an idle state by going on-hook; when the line
becomes available, the Station will be notified with ringing.
3.2.3 Account Codes: Tracking External calls for billing
In some cases, you or your company may desire to
track calls for billing or other purposes.
Account Code is entered, it is output from the system
to a printer in the SMDR report. An Account Code Flex
button can be programmed (refer to
to Flex
Lift the handset,
Press the assigned Account Code button,
Dial the Account Code (1-12 digits),
Dial *, Intercom dial tone is heard,
Place the CO/IP call as normal.
Press the assigned Account Code button,
Dial the Account Code (1-12 digits),
Dial *.
button,
buttons).
17
User Guide
When an
Assigning features