Installing And Verifying The License On The New Lsp; Opening The Tcp Ports On The S8500 Lsp - Avaya S8500 Installing And Configuring

Chapter 7: Install an S8500 Media Server as an LSP
Note:
The gateway that provides the serial number must be connected to the LSP such
Note:
that it remains connected in the event of a network failure.

Installing and verifying the license on the new LSP

On the S8500 LSP, install a new license file with the appropriate settings for an LSP server.
To install the license file and the authentication file, complete the following steps:
1. On the Maintenance Web Interface, under Security, click License File.
2. Select Install the license I previously downloaded and click Submit to install the
license file.
!
Important:
The system displays a message that warns you that the license requires a restart.
Important:
Do not restart the server at this time.
3. Under Security, click Authentication File.
4. Select Install the Authentication file I previously downloaded and click Install.
The system tells you the authentication is installed successfully.
5. To verify that the S8500 Media Server that you are converting is licensed as an LSP:
Note:
When you access the SAT screen before you reset the system, the screen might
Note:
indicate "License mode not available." This problem is resolved after the reset.
a. Open a SAT session on the LSP and type display system-parameters
customer-options and press Enter.
b. On the System-Parameters Customer-Options form, verify that the Local Survivable
Processor field is set to y and verify that the Processor Ethernet field is set to y.

Opening the TCP ports on the S8500 LSP

You can open various TCP ports for Processor Ethernet (PE) on the firewall to enable the
connections to work for the LSP.
78
Installing and Configuring the Avaya S8500 Media Server June 2006