Rack Mount Installation - HP NetServer LC 2000r Installation Manual

Chapter 1

Rack Mount Installation

Follow the setup steps in the exact order shown below for a successful rack
installation. Skip any steps that do not apply to your installation.
1. Unpack the shipping box and verify the contents against the Contents List
included with your HP NetServer.
a. If anything is missing or damaged, call your reseller.
b. Store the empty boxes and packing material in a safe place.
This is especially important if you plan to ship the HP NetServer
elsewhere for final installation.
WARNING
To prevent serious injury or damage to the HP NetServer, do
not attempt to lift the HP NetServer by yourself. The HP
NetServer LC 2000r weighs approximately 80 lbs. (36 kg) and
requires more than one person to lift it.
2. Familiarize yourself with the HP NetServer's controls, ports, and
indicators.
Refer to Chapter 2, "Controls, Ports, and Indicators."
Shown
Removed for Detail
Figure 1-3. HP NetServer LC 2000r
Setting Up the HP NetServer
5