Rack Mount Installation - HP NetServer LH 6000 Installation Manual

All manuals and user guides at all-guides.com
Chapter 1

Rack Mount Installation

Follow the setup steps in the exact order shown below for a successful rack
installation. Skip any steps that do not apply to your installation.
1. As you unpack the shipping box, verify contents against the Contents List
included with your HP NetServer. If anything is missing or damaged, call
your reseller.
Store the empty boxes and packing material in a safe place. This is
especially important if you plan to ship the NetServer elsewhere for final
installation.
WARNING The HP NetServers LH 6000r and LH 6000 each weigh up to
175 pounds (80 kgs). More than one person is required to lift a
server. Do not attempt to lift the NetServer by yourself.
Failure to observe this warning could result in serious injury,
or damage to the HP NetServer.
2. Familiarize yourself with the HP NetServer's controls, indicators, and
ports.
Refer to Chapter 2, "Controls, Ports, and Indicators."
3. If you have optional internal items to add to the NetServer (memory,
accessory boards, mass storage, or processors), remove covers and the
bezel. If not, skip to step 8.
Refer to Chapter 3, "Opening and Closing the HP NetServer."
2
Setting Up the HP NetServer LH 6000/6000r
Figure 1-2. LH 6000r (Rack-Mount)