Rack Mount Installation - HP D7171A - NetServer - LPr Installation Manual

Chapter 1
l
Use the removable and reusable rack-mounting handles to move and place
the LH 3000r in the rack. Remove them only when you have secured the
NetServer to the rack.
The LH 3000 has a locked bezel; the LH 3000r does not.

Rack Mount Installation

Follow the setup steps in the exact order shown below for a successful rack
installation. Skip any steps that do not apply to your installation.
1. As you unpack the shipping box, verify contents against the Contents List
included with your NetServer. If anything is missing or damaged, call your
reseller.
Store the empty boxes and packing material in a safe place. This is
especially important if you plan to ship the HP NetServer elsewhere for
final installation.
WARNING The HP NetServer LH 3000r and LH 3000 each weigh up to
165 pounds (75 kgs). More than one person is required to lift a
server. Do not attempt to lift the HP NetServer by yourself.
Failure to observe this warning could result in serious injury
or damage to the HP NetServer.
2. Familiarize yourself with the HP NetServer's controls, indicators, and
ports.
Refer to Chapter 2, "Controls, Ports, and Indicators."
2
Setting Up the HP NetServer LH 3000r and LH 3000
Figure 1-2. LH 3000r and Bezel