Front Panel Led Indicators - HP NetServer LC 2000r Installation Manual

Chapter 2

Front Panel LED Indicators

Table 2-2. Component Indicators
LED ICON
Disk LED This Disk LED has two distinctive states:
This Temperature LED has three distinctive colors:
Temperature
LED
Fan LED This Fan LED has three distinctive colors:
This RPS (Redundant Power Supply) LED has three
RPS LED
distinctive colors:
Reserved This LED is reserved and not used in this release.
Description
l
off for inactive operation
l
blinking Green for SCSI drive activity.
l
steady Green for normal operation
l
blinking Red at 1 Hz blink rate for an
overheated condition inside the HP NetServer
l
blinking Amber at 0.5 Hz blink rate for a
warning condition.
l
steady Green for normal operation
l
blinking Red at 1 Hz blink rate for a non-
operational fan condition inside the NetServer
l
blinking Amber at 0.5 Hz blink rate for a
warning condition indicating one of the fans
may be turning too slowly.
l
steady Green for normal operation
l
blinking Red at 1 Hz blink rate for a bad power
supply
l
blinking Amber at 0.5 Hz blink rate for a
warning condition indicating a power supply
may not be working correctly.
Controls, Ports and Indicators
11