Rack Mount Installation - HP D7171A - NetServer - LPr Installation Manual

Chapter 1

Rack Mount Installation

Follow the setup steps in the exact order shown below for a successful rack
installation. Skip any steps that do not apply to your installation.
1. As you unpack the shipping container, verify its contents against the
Contents List that was included with the LT 6000r. If anything is missing
or damaged, call your reseller.
Store the empty shipping container and packing material in a safe place.
This is important if you plan to ship the NetServer to another site for final
inspections.
WARNING The LT 6000r weighs approximately 100 lbs (45 kgs). More
than one person is required to lift the server. Do not attempt to
lift the NetServer by yourself. Failure to observer this warning
could result in serious injury or damage to the NetServer.
2. Familiarize yourself with the LT 6000r's controls, indicators, and ports.
Refer to Chapter 2, Controls, Indicators, and Ports.
2
Setting Up the HP NetServer LT 6000r
Figure 1-2. LT 6000r with Open Bezel