Pedestal Installation - HP NetServer LC 2000r Installation Manual

Chapter 1
l Use the removable and reusable rack-mounting handles to move and place
the LC 2000r in the rack. Remove the handles only when you have secured
the HP NetServer to the rack slides.
l The height at which you install the HP NetServer in the rack determines
how you will service the HP NetServer.

Pedestal Installation

Follow the setup steps in the exact order shown below for a successful pedestal
installation. Skip any steps that do not apply to your installation.
1. Unpack the shipping box and verify the contents against the Contents List
included with your HP NetServer.
a. If anything is missing or damaged, call your reseller.
b. Store the empty boxes and packing material in a safe place.
This is especially important if you plan to ship the HP NetServer
elsewhere for final installation.
2
Figure 1-2. HP NetServer LC 2000
Setting Up the HP NetServer