Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 33 ADVANCED > System Configuration > Firmware
LABEL
File Path
Browse...
Upload
9.4.1 The Firmware Upload Process
When the WiMAX Modem uploads new firmware, the process usually takes about
two minutes. The device also automatically restarts in this time. This causes a
temporary network disconnect.
Note: Do not turn off the device while firmware upload is in progress!
After two minutes, log in again, and check your new firmware version in the
Status screen. You might have to open a new browser window to log in.
If the upload is not successful, you will be notified by error message.
Click Return to go back to the Firmware screen.
User's Guide
DESCRIPTION
Enter the location of the *.bin file you want to upload, or click
Browse... to find it. You must decompress compressed (.zip) files
before you can upload them.
Click this to find the *.bin file you want to upload.
Click this to begin uploading the selected file. This may take up to two
minutes.
Note: Do not turn off the device while firmware upload is in
progress!
Chapter 9 The System Configuration Screens
105
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
