Table 38 Custom Tones Details - ZyXEL Communications MAX-206M1R series User Manual

Chapter 10 The Service Configuration Screens
Table 37 VOICE > Service Configuration > SIP Settings > Advanced (continued)
LABEL
Expiration Time
Fax Option
G.711 Fax
Passthrough
T.38 Fax Relay
Call Forward
Call Forward
Table
Caller Ringing
Enable
Caller Ringing
Tone
On Hold
Enable
On Hold Tone
Back
Apply
Reset
10.2.1.6 Custom Tones (IVR)
IVR (Interactive Voice Response) is a feature that allows you to use your
telephone to interact with the WiMAX Modem. The WiMAX Modem allows you to
record custom tones for the Caller Ringing Tone and On Hold Tone functions.
The same recordings apply to both the caller ringing and on hold tones.

Table 38 Custom Tones Details

LABEL
Total Time for All Tones
120
DESCRIPTION
Keep the default value, unless your VoIP service provider tells you to
change it. Enter the number of seconds the SIP server should provide
the message waiting service each time the WiMAX Modem subscribes to
the service. Before this time passes, the WiMAX Modem automatically
subscribes again.
Select this if the WiMAX Modem should use G.711 to send fax
messages. The peer devices must also use G.711.
Select this if the WiMAX Modem should send fax messages as UDP or
TCP/IP packets through IP networks. This provides better quality, but it
may have inter-operability problems. The peer devices must also use
T.38.
Select which call forwarding table you want the WiMAX Modem to use
for incoming calls. You set up these tables in VOICE > Phone Book >
Incoming Call Policy.
Check this box if you want people to hear a customized recording when
they call you.
Select the tone you want people to hear when they call you. See
Custom Tones (IVR) on page 120
these tones.
Check this box if you want people to hear a customized recording when
you put them on hold.
Select the tone you want people to hear when you put them on hold.
See Custom Tones (IVR)
these tones.
Click this to return to the SIP Settings screen without saving your
changes.
Click to save your changes.
Click to restore your previously saved settings.
DESCRIPTION
128 seconds for all custom tones combined
for information on how to record
on page 120 for information on how to record
User's Guide