Wimax Configuration - ZyXEL Communications MAX-206M1R series User Manual

Chapter 7 The WAN Configuration Screens
Table 19 ADVANCED > WAN Configuration > Internet Connection > ISP
Parameters for Internet Access (continued)
LABEL
Get
automatically
from ISP
(Default)
Use Fixed IP
Address
IP Subnet Mask
Gateway IP
Address
Apply
Reset

7.3 WiMAX Configuration

Click ADVANCED > WAN Configuration > WiMAX Configuration to set up the
frequencies used by your WiMAX Modem.
In a WiMAX network, a mobile or subscriber station must use a radio frequency
supported by the base station to communicate. When the WiMAX Modem looks for
a connection to a base station, it can search a range of frequencies.
82
DESCRIPTION
Select this if you have a dynamic IP address. A dynamic IP address
is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
A static IP address is a fixed IP that your ISP gives you. Type your
ISP assigned IP address in the IP Address field below.
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are
implementing subnetting.
Specify a gateway IP address (supplied by your ISP).
Click to save your changes.
Click to restore your previously saved settings.
User's Guide