Figure 84 Tools > Remote Management > Tr069; Table 71 Tools > Remote Management > Tr069 - ZyXEL Communications MAX-206M1R series User Manual

Click TOOLS > Remote Management > TR069 to access this screen. Use this
screen to open WiMAX Modem's auto-configuration and dynamic service
configuration options.
Figure 84 TOOLS > Remote Management > TR069
The following table describes the labels in this screen.
Table 71 TOOLS > Remote Management > TR069
LABEL
Active
ACS URL
User Name
Password
Connection
Request
User Name
Connection
Request
Password
User's Guide
DESCRIPTION
Select this option to turn on the WiMAX Modem's TR-069 feature.
Note: If this feature is not enabled then the WiMAX Modem cannot
be managed remotely.
Enter the URL or IP address of the auto-configuration server.
Enter the user name sent when the WiMAX Modem connects to the ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Enter the password sent when the WiMAX Modem connects to an ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Enter the connection request user name that the ACS must send to the
WiMAX Modem when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Enter the connection request password that the ACS must send to the
WiMAX Modem when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Chapter 16 The Remote Management Screens
193