Dhcp Client; Figure 17 Setup > Set Ip Address; Table 9 Setup > Set Ip Address; Table 10 Setup > Set Ip Address - ZyXEL Communications MAX-206M1R series User Manual

The following table describes the labels in this screen.
Table 9 SETUP > Set IP Address
LABEL
IP Address
IP Subnet Mask
Apply
Reset

5.3 DHCP Client

Click the SETUP > DHCP Client to view connection information for all clients that
have been configured by the WiMAX Modem's internal DHCP server.
Figure 17 SETUP > Set IP Address
The following table describes the labels in this screen.
Table 10 SETUP > Set IP Address
LABEL
#
IP Address
Host Name
MAC Address
User's Guide
DESCRIPTION
Enter the IP address of the WiMAX Modem on the LAN.
Note: This field is the IP address you use to access the
WiMAX Modem on the LAN. If the web configurator is
running on a computer on the LAN, you lose access to
it as soon as you change this field and click Apply.
You can access the web configurator again by typing
the new IP address in the browser.
Enter the subnet mask of the LAN.
Click to save your changes.
Click to restore your previously saved settings.
DESCRIPTION
This indicates the number of the item in this list.
This indicates the IP address of a connected client device.
This indicates the host name of a connected client device. If the
device is computer, then the host name is the computer name.
This indicates the MAC address of a connected client device.
Chapter 5 The Setup Screens
59