9.1
Firmware Upload Overview
Find firmware at
www.zyxel.com
successful upload, the system will reboot.
Only use firmware for your Prestige's specific model. Refer to the label on the
9.2
Checking System Firmware Version
Syntax:
sys version
This command displays the current system firmware version. An example is shown next.
ras> sys version
ras>
9.3
Uploading Firmware via Utility
Do not turn off the device while firmware upload is in progress!!
To upgrade the firmware by using the software utility with a "*.exe" extension in the zip firmware file,
follow the steps listed below:
Step 1. Find and download the firmware from
Remember that you must decompress compressed (.zip) files before you can upload it.
Step 2. Double-click the utility icon, as shown below, in your zip firmware file.
Firmware Upload
and refer to the following sections for upgrading firmware. After a
bottom of your Prestige.
ZyNOS version: V3.40(SN.0)b2 | 7/9/2004
romRasSize: 458764
system up time:
0:00:26 (a74 ticks)
bootbase version: V1.00 | 6/14/2004
ZyNOS CODE: P660M-67C ATU-R Jul 09 2004 19:54:59
Figure 9-1 Version Command Example
Firmware Upload
This chapter tells you how to upload new firmware.
www.zyxel.com
and store the firmware on your computer.
Prestige 650M-6x User's Guide
Chapter 9
9-1