17.3.1 Class Configuration
Click the Create New Class button or the edit icon in the Class Setup screen to
configure a classifier.
Figure 87 QoS > Class Setup > Class Configuration
The following table describes the labels in this screen.
Table 74 QoS Class Setup
LABEL
Class Configuration
Active
Index
Name
Interface
DSCP
Filter Configuration
User's Guide
DESCRIPTION
Select this to make a class active.
Enter an index number for the class. Similar classes are processed in
order of index number, from lowest to highest.
Enter a descriptive name of up to 20 printable English keyboard
characters, including spaces.
Select an interface to which the class will apply:
•
From WAN - The class is applied to all packets incoming from the
WAN (Wide Area Network).
•
From LAN - The class is applied to all packets outgoing from the
LAN (Local Area Network).
Enter a DSCP value with which the WiMAX Modem replaces the DSCP
field in the packets.
Chapter 17 QoS
197