Authentication Settings; Figure 8 Internet Connection Wizard > Authentication Settings Screen; Table 6 Internet Connection Wizard > Authentication Settings Screen - ZyXEL Communications MAX-206M1R series User Manual

3.1.3 Authentication Settings

This Internet Connection Wizard screen allows you to configure your Internet
access settings. The settings here correspond to the ADVANCED > WAN
Configuration > Internet Connection screen (see
more information).
Figure 8 Internet Connection Wizard > Authentication Settings Screen
The following table describes the labels in this screen.
Table 6 Internet Connection Wizard > Authentication Settings Screen
LABEL
Authentication
User Name
Password
Anonymous Identity
User's Guide
DESCRIPTION
Use this field to enter the username associated with your
Internet access account. You can enter up to 61 printable
ASCII characters.
Use this field to enter the password associated with your
Internet access account. You can enter up to 47 printable
ASCII characters.
Enter the anonymous identity provided by your Internet
Service Provider. Anonymous identity (also known as outer
identity) is used with EAP-TTLS encryption. The anonymous
identity is used to route your authentication request to the
correct authentication server, and does not reveal your real
user name. Your real user name and password are encrypted
in the TLS tunnel, and only the anonymous identity can be
seen.
Leave this field blank if your ISP did not give you an
anonymous identity to use.
Chapter 3 Internet Connection Wizard
Section 7.2 on page 80 for
47