Upload Firmware; Figure 6-10 Restore Configuration; Figure 6-11 Hyperterminal Screen; Figure 6-12 Successful Backup - ZyXEL Communications Prestige 642 User Manual

Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Step 2. Press "Y" to indicate that you want to continue. The following procedure is for the
HyperTerminal program. The procedure for other serial communications programs should be
similar.
Step 3. Click "Transfer", then "Send File" to display the following screen.
Step 4. Enter where the rom configuration file is on your computer, and make sure you choose the X-
Modem Protocol. Then press "Send".
Step 5. After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Save to ROM
Hit any key to start system reboot.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.
6.6

Upload Firmware

Menu 24.7 -- System Maintenance - Upload Firmware allows you to upgrade the firmware and the
configuration file via the console port. Note that this function erases the old data before installing the new
one; please do not attempt to update unless you have the new firmware at hand. There are 2 components in
the system: the router firmware and the configuration file, as shown below.
System Maintenance

Figure 6-10 Restore Configuration

Figure 6-11 HyperTerminal Screen

Figure 6-12 Successful Backup

Prestige 642 ADSL Modem
Enter where the rom
configuration file is on your
computer.
Choose the
X-Modem
Protocol.
6-9