Common; Figure 55 Voice > Phone > Common; Table 42 Voice > Phone > Analog Phone > Advanced - ZyXEL Communications MAX-206M1R series User Manual

Chapter 11 The Phone Screens
The following table describes the labels in this screen.
Table 42 VOICE > Phone > Analog Phone > Advanced
LABEL
Voice Volume Control
Speaking
Volume
Listening
Volume
Echo Cancellation
G.168 Active
Dialing Interval Select
Dialing Interval
Select
VAD Support
Back
Apply
Reset

11.3 Common

Click VOICE > Phone > Common to activate and deactivate immediate dialing.
Figure 55 VOICE > Phone > Common
132
DESCRIPTION
Enter the loudness that the WiMAX Modem uses for speech that it sends
to the peer device. -14 is the quietest, and 14 is the loudest.
Enter the loudness that the WiMAX Modem uses for speech that it
receives from the peer device. -14 is the quietest, and 14 is the loudest.
Select this if you want to eliminate the echo caused by the sound of
your voice reverberating in the telephone receiver while you talk.
Enter the number of seconds the WiMAX Modem should wait after you
stop dialing numbers before it makes the phone call. The value depends
on how quickly you dial phone numbers.
If you select Active Immediate Dial in VOICE > Phone > Common,
you can press the pound key (#) to tell the WiMAX Modem to make the
phone call immediately, regardless of this setting.
Select this if the WiMAX Modem should stop transmitting when you are
not speaking. This reduces the bandwidth the WiMAX Modem uses.
Click this to return to the Analog Phone screen without saving your
changes.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide