First Voice Account Settings; Figure 12 Voip Connection > First Voice Account Settings; Table 8 Voip Connection > First Voice Account Settings - ZyXEL Communications MAX-206M1R series User Manual

Chapter 4 VoIP Connection Wizard

4.2.1 First Voice Account Settings

This VoIP Connection Wizard screen allows you to configure your voice account.
The settings here correspond to the VOICE > Service Configuration > SIP
Setting screen (see
Figure 12 VoIP Connection > First Voice Account Settings
The following table describes the labels in this screen
Table 8 VoIP Connection > First Voice Account Settings
LABEL
SIP Number
SIP Server Address
SIP Service Domain
User Name
Password
52
Section 10.2 on page 113
DESCRIPTION
Enter your SIP number in this field (use the number or text that
comes before the @ symbol in a SIP account like
provider.com). You can use up to 127 ASCII characters.
Type the IP address or domain name of the SIP server in this
field. It doesn't matter whether the SIP server is a proxy,
redirect or register server. You can use up to 95 ASCII
characters.
Enter the SIP service domain name in this field (the domain
name that comes after the @ symbol in a SIP account like
1234@VoIP-provider.com). You can use up to 127 ASCII
Extended set characters.
This is the user name for registering this SIP account with the
SIP register server. Type the user name exactly as it was given
to you. You can use up to 95 ASCII characters.
Type the password associated with the user name above. You
can use up to 95 ASCII Extended set characters.
for more information).
1234@VoIP-
User's Guide