Table 96 Status - ZyXEL Communications MAX-206M1R series User Manual

Chapter 19 The Status Screen
The following tables describe the labels in this screen.

Table 96 Status

LABEL
Refresh Interval Select how often you want the WiMAX Modem to update this screen.
Refresh Now
Device Information
System Name
Firmware
Version
WAN Information
IP Address
IP Subnet Mask
DHCP
LAN Information
IP Address
IP Subnet Mask
DHCP
WiMAX Information
Operator ID
BSID
216
DESCRIPTION
Click this to update this screen immediately.
This field displays the WiMAX Modem system name. It is used for
identification.
You can change this in the ADVANCED > System Configuration >
General screen's System Name field.
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created.
You can change the firmware version by uploading new firmware in
ADVANCED > System Configuration > Firmware.
This field displays the current IP address of the WiMAX Modem in the
WAN.
This field displays the current subnet mask on the WAN.
This field displays what DHCP services the WiMAX Modem is using in the
WAN. Choices are:
Client - The WiMAX Modem is a DHCP client in the WAN. Its IP
address comes from a DHCP server on the WAN.
None - The WiMAX Modem is not using any DHCP services in the
WAN. It has a static IP address.
This field displays the current IP address of the WiMAX Modem in the
LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the WiMAX Modem is providing
to the LAN. Choices are:
Server - The WiMAX Modem is a DHCP server in the LAN. It assigns
IP addresses to other computers in the LAN.
Relay - The WiMAX Modem is routing DHCP requests to one or more
DHCP servers. The DHCP server(s) may be on another network.
None - The WiMAX Modem is not providing any DHCP services to the
LAN.
You can change this in ADVANCED > LAN Configuration > DHCP
Setup.
Every WiMAX service provider has a unique Operator ID number, which
is broadcast by each base station it owns. You can only connect to the
Internet through base stations belonging to your service provider's
network.
This field displays the identification number of the wireless base station
to which the WiMAX Modem is connected. Every base station transmits
a unique BSID, which identifies it across the network.
User's Guide