Region; Figure 56 Voice > Phone > Region; Table 43 Voice > Phone > Common; Table 44 Voice > Phone > Region - ZyXEL Communications MAX-206M1R series User Manual

The following table describes the labels in this screen.
Table 43 VOICE > Phone > Common
LABEL
Active
Immediate Dial
Apply
Reset

11.4 Region

Click VOICE > Phone > Region to maintain settings that often depend on the
region of the world in which the WiMAX Modem is located.
Figure 56 VOICE > Phone > Region
The following table describes the labels in this screen.
Table 44 VOICE > Phone > Region
LABEL
Region Settings
Call Service
Mode
Apply
Reset
User's Guide
DESCRIPTION
Select this if you want to use the pound key (#) to tell the WiMAX
Modem to make the phone call immediately, instead of waiting the
number of seconds you selected in the Dialing Interval Select in
VOICE > Phone > Analog Phone.
If you select this, dial the phone number, and then press the pound key
if you do not want to wait. The WiMAX Modem makes the call
immediately.
Click to save your changes.
Click to restore your previously saved settings.
DESCRIPTION
Select the place in which the WiMAX Modem is located. Do not select
Default.
Select the mode for supplementary phone services (call hold, call
waiting, call transfer and three-way conference calls) that your VoIP
service provider supports.
• Europe Type - use supplementary phone services in European
mode
• USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact
your VoIP service provider.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 11 The Phone Screens
133