Port Forwarding Rule Setup; Figure 36 Advanced > Nat Configuration > Port Forwarding > Rule Setup; Table 28 Advanced > Nat Configuration > Port Forwarding > Rule Setup - ZyXEL Communications MAX-206M1R series User Manual

8.3.2 Port Forwarding Rule Setup

Click a port forwarding rule's Edit icon in the ADVANCED > NAT Configuration
> Port Forwarding screen to activate, deactivate, or edit it.
Figure 36 ADVANCED > NAT Configuration > Port Forwarding > Rule Setup
The following table describes the labels in this screen.
Table 28 ADVANCED > NAT Configuration > Port Forwarding > Rule Setup
LABEL
Active
Service Name
Start Port
End Port
Server IP
Address
Apply
Cancel
User's Guide
DESCRIPTION
Select this to enable this rule. Clear this to disable this rule.
Enter a name to identify this rule. You can use 1 - 31 printable ASCII
characters, or you can leave this field blank. It does not have to be a
unique name.
Enter the port number or range of port numbers you want to forward to
the specified server.
To forward one port number, enter the port number in the Start Port
and End Port fields.
To forward a range of ports,
• enter the port number at the beginning of the range in the Start
Port field
• enter the port number at the end of the range in the End Port field.
Enter the IP address of the server to which to forward packets for the
selected port number(s). This server is usually on the LAN.
Click to save your changes.
Click to return to the previous screen without saving your changes.
Chapter 8 The NAT Configuration Screens
93