Replacing The Bottom Case; Figure 2-24. Installing The Docking Doors; Figure 2-25. Installing The Pcmcia Doors - HP Pavilion zt1100 Service Manual

Replacing the Bottom Case

Installation Procedure
1. Install a new Microsoft Product ID label.
2. Transfer the old serial number label and install a new overlay, or create a new serial number label
using the steps on the following page.
3. If you need to install or replace the docking doors or PCMCIA doors, refer to the figures below.
HP Pavilion zt1100/xz100 Omnibook xt1000

Figure 2-24. Installing the Docking Doors

Figure 2-25. Installing the PCMCIA Doors

Removal and Replacement 2-35