Communication Setting Level - Omron E5CN User Manual

Communication Setting Level

5-7 Communication Setting Level
u-no
Communications unit No.
bps
Baud rate
len
Communications data length
sbit
Communications stop bit
prty
Communications parity
Function
Setting
See
• Each parameter is enabled when the power is reset.
• Match the communications specifications of the E5CN and the host com-
puter. If a 1 : N connection is being used, ensure that the communications
specifications for all devices in the system (except "Communications unit
No.") are the same.
Displayed
Parameter
Characters
A:;
Communications
unit No.
.<?
Baud rate
81:
Communications
data length
?.5@
Communications
stop bit
<>@E
Communications
parity
Related parameters
"Communications writing" (adjustment level) (page 72)
Communications function must be
supported.
Set Value
0, 1 to 99
1.2 / 2.4 / 4.8 / 9.6 / 19.2 (kbps)
7 / 8 (bit)
1 / 2
none / eVen / odd
Highlighted characters indicate defaults.
Section 5-7
Setting Range
0 to 99
1.2/2.4/ 4.8/
9.6/19.2 (kbps)
7/8 (bit)
1/2
None/even/odd
105