Omron E5CN User Manual page 100

Advanced Function Setting Level
See
eV-1
Event input assignment 1
eV-2
Event input assignment 2
Function
Setting
See
90
• When the number of multi-SP uses is set to "2"
Event input 1
OFF
ON
OFF
ON
Note Event input can be used when the option event input unit E53-
CNHB is mounted in the E5CN. Select event input ON/OFF while
the E5CN is turned ON. Judgment of event input ON/OFF is carried
out on event inputs of 50 ms or more.
Related parameters
"Event input assignment 1" (advanced function setting level)
"Event input assignment 2" (advanced function setting level)
"Multi-SP uses" (advanced function setting level)
"Set point 0" "Set point 1" "Set point 2" "Set point 3" (adjustment level)
• The following functions are assigned as event input 1 or event input 2:
"Run/stop"
Settings
:;:1
None
?@;<
RUN/STOP
• Default is "none" for event input assignment 1 and "stop" for event input
assignment 2.
Related parameters
"Set point 0" "Set point 1" "Set point 2" "Set point 3" (adjustment level)
"Number of multi-SP uses" (advanced function setting level)
Event input 2
OFF
OFF
ON
ON
The number of multi-SP uses must
be set to "0" or "1".
Function
Section 5-6
Selected Set Point
Set point 0
Set point 1
Set point 2
Set point 3