Setup Levels Diagram
The following diagram shows an overview of the setup levels on the E5CN. To move to the advanced function
setting level and calibration level, you must enter passwords. Some parameters are not displayed depending
on the protect level setting and the conditions of use.
Control stops when you move from the operation level to the initial setting level.
128
Power ON
Operation level
key
Less than
1 second
key
25
1 second min.
100
Initial setting level
Less than
1 second
Password input
key
set value "−169"
1 second min.
Advanced
function setting level
Password input
set value "1201"
Calibration level
Adjustment level
1 second min.
key
3 seconds min.
key
The PV display flashes after one second.
Control stops.
Commu-
nications
setting level
key
Note :
Communications setting level is displayed
when the optional communication unit
E53-CNH03 is mounted.
Appendix A
+
key
+
key
The PV display
flashes
25
100
+
key
3 seconds min.
Protect level
Control in progress
Control stopped