Omron E5CN User Manual page 113

Advanced Function Setting Level
PV color change
colr
function
Function
Setting
Mode
Constant
Linked to
alarm 1
Linked to
PV stable
band
See
Use the PV color change function to change the PV (1st display) color. There
are "red color" and "green color", and can be selected from the following three
modes and five functions.
• Mode which displays "red" or "green" all the time.
• Mode which switches the PV display color to "red → green (when alarm 1
is ON)" and " green → red (when alarm 1 is ON)" according to alarm 1.
• Mode which switches the PV display color to "red → green (within PV sta-
ble band → red)" according to PV stable band. Set the PV stable band to
"PV stable band" in "Advanced function setting level".
• The default is "red : Red".
The following shows the display functions set by the "PV color change func-
tion".
Setting Function
>10
Red Always Red
3>:
Green Always Green
ON
OFF
ALM1 off
>3
Red→Green Red
3>
Green→Red Green
Low
Low
>3>
Red→Green Red
→Red
Related parameters
"PV stable band" (advanced function setting level) (page 104)
PV Display Color
Alarm
value
ALM1 lit
SP
ALM1 lit
Green
Red
PV stable PV stable
band band
Within range High
PV
SP
Within PV High
stable band
Green Red
Section 5-6
Application Example
For matching the display
color with other controller
models
For matching the display
color with other controller
models
PV
Application Example
For displaying
PV reach signal
For displaying
abnormal signal
Application Example
For displaying whether the
temperature is within the sta-
ble band or not.
103