Installation; Dimensions; Panel Cutout - Omron E5CN User Manual

Installation

2-1

Installation

2-1-1

Dimensions

E5CN
E5CN
48 × 48
2-1-2

Panel cutout

When mounted separately
10
(Unit: mm)
102
78
9
(Unit: mm)
+0.6
45
0
• Insert the controller through the hole in the panel from the front, and push
the adapter on from the rear. Push the adapter up to the back of the panel
ensuring that the controller is pushed all the way in, removing any gap
between the controller, panel and adapter. Finally use the two screws on
the adapter to secure the unit in place.
• To mount the E5CN so that it is waterproof, insert the waterproof packing
onto the E5CN. The E5CN cannot be waterproofed when the E5CN is
group-mounted.
• The recommended panel thickness is 1 to 5 mm.
• Maintain the specified mounting space between each controller. Control-
lers must not be closely mounted vertically.
• When two or more E5CNs are mounted, make sure that the surrounding
temperature does not exceed the allowable operating temperature given
in the specifications.
93
• The E5CN-@-500 is provided with a terminal cover.
When group-mounted
(48 × number of units -2.5)
Section 2-1
1 11 6
2 12 7
3 13 8
4 14 9
5 15 10
+1.0
0