Communications Function; Selecting Parameters; Fixing Settings - Omron E5CN User Manual

Communications Function

1-3-1

Selecting parameters

1-3-2

Fixing settings

1-4

Communications Function

1,2,3...
• To select parameters in each level, press the
key advances to the next parameter. For details on each parameter,
see Section 5.
Parameter
1
Parameter
2
Parameter
3
Parameter
n
• If you press the
top parameter for the current level.
• To change parameter settings or setup, specify the setting using the
or keys, and either leave the setting for at least two seconds or press
the key. This fixes the setting.
• When another level is selected, the parameter and setting on the display
are fixed.
• When you turn the power OFF, you must first fix the settings or parameter
setup (by pressing the
sometimes not changed by merely pressing the
The E5CN can be provided with a communications function that allows you to
check and set controller parameters on a host computer. If the communica-
tions function is required, mount the option unit E53-CNH03 in the E5CN. For
details on the communications function, see the separate "Communications
Functions User's Manual."
Follow the procedure below to move to the communications setting level.
1. Press the key for at least three seconds in the "operation level". The
level moves to the "initial setting level".
2. Press the key for less than one second. The "initial setting level"
moves to the "communications setting level".
key at the final parameter, the display returns to the
key). The settings and parameter setup are
Section 1-4
key. Each press of the
or keys.
7