Omron E5CN User Manual page 80

Operation Level
MV monitor (OUT1)
Function
Monitor
See
c-o
MV monitor (OUT2)
Function
Monitor
See
70
This parameter is for monitoring the manipulated variable on the control out-
put 1 side during operation.
• This parameter cannot be set.
• During standard control, the manipulated variable is monitored, and dur-
ing control output 1 and cooling control, the manipulated variable on the
heating side is monitored.
• Default is "OFF" and the manipulated variable is not displayed.
Setting Range
Standard
Heating and cooling
Related parameters
"Manipulated variable display" (advanced function setting level)
This parameter is for monitoring the manipulated variable on the control out-
put 2 side during operation.
• This parameter cannot be set.
• During heating and cooling control, the manipulated variable on the con-
trol output 2 side ("ALM 2" terminal output) is monitored.
Setting Range
Heating and cooling
Related parameters
"Standard/heating and cooling" (initial setting level)
"Manipulated variable display" (advanced function setting level)
Manipulated variable display must be
set to "ON".
Unit Default
0.0 to 100.0 %
0.0 to 100.0 %
The control must be heating and
cooling control.
Manipulated variable display must be
set to "ON".
Unit Default
0.0 to 100.0 %
Section 5-3