Omron E5CN User Manual page 109

Advanced Function Setting Level
o-dp
Manipulated variable display
Function
Setting
Automatic return of display mode
Function
Setting
This parameter displays the manipulated variable.
The manipulated variable is displayed when the "manipulated variable monitor
(OUT1) and (OUT2)" parameters are set to "ON", and not displayed when
these parameters are set to "OFF".
Setting Range
;:: Displayed / ;22: Not displayed
• If you do not operate any of the keys on the front panel for the time set by
this parameter in the "operation level" and "adjustment level", the display
automatically returns to the PV/SP display.
• This function is disabled (display does not change automatically) when
this parameter is set to "OFF".
Setting Range
OFF, 1 to 99
Default
OFF
Unit Default
Second OFF
Section 5-6
99