Figure 9-29. Com Port Setup Screen - Powerware 9390 Installation & Operation Manual

Using the Control Panel
Select COM PORT SETUP from the System Setup Level 1 menu to display the COM Port
Setup screen. This screen allows selection of the serial COM port to set up. Figure 9-29
shows the COM Port Setup screen.
Use the
SELECT pushbutton. To return to the System Setup screen, press the
9-24
or pushbuttons to highlight the the COM port to be set up, then press the
COM PORT SETUP
COM 1
COM 2
COM 3

Figure 9-29. COM Port Setup Screen

Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C
®
pushbutton.
SELECT