Basic System Configurations - Powerware 9390 Installation & Operation Manual

Introduction

1.1 Basic System Configurations

The following basic UPS system configurations are possible:
Single module UPS and one to four battery cabinets
Single module UPS, one to four battery cabinets, and an optional Integrated Distribution
Cabinet (IDC)
Hot Sync parallel system with two UPS modules, one to four battery cabinets for each
UPS, and an optional module tie cabinet
- One capacity/one redundant (1+1)
- Two capacity (2+0)
Hot Sync parallel system with three UPS modules, one to four battery cabinets for each
UPS, and an optional module tie cabinet
- Two capacity/one redundant (2+1)
- Three capacity (3+0)
Hot Sync parallel system with four UPS modules, one to four battery cabinets for each
UPS, and an optional module tie cabinet
- Three capacity/one redundant (3+1)
- Four capacity (4+0)
Hot Sync parallel system with two UPS modules, one to four battery cabinets for each
UPS, an optional module tie cabinet, and an optional IDC
- One capacity/one redundant (1+1)
- Two capacity (2+0)
Hot Sync parallel system with three UPS modules, one to four battery cabinets for each
UPS, an optional module tie cabinet, and an optional IDC
- Two capacity/one redundant (2+1)
- Three capacity (3+0)
Hot Sync parallel system with four UPS modules, one to four battery cabinets for each
UPS, an optional module tie cabinet, and an optional IDC
- Three capacity/one redundant (3+1)
- Four capacity (4+0)
The UPS system configuration can be enhanced by adding optional accessories such as a
Remote Emergency Power-Off (REPO) control, Remote Monitor Panel (RMP), or X-Slott
communication cards.
1-2
Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C
®