Table of Contents
Advertisement
Additional UPS Features
Table 1. DIP Switch Settings
Communication Options
The UPS is equipped with a USB and a DB-9 communication port. Either
the USB port or the DB-9 communication port may be used to monitor
the UPS; however, they cannot operate simultaneously.
USB Port
The UPS can communicate with a USB-compliant computer using LanSafe
Power Management Software (v5.0.1 or higher). To establish
communication between the UPS and a computer:
26
Powerware
®
Output Voltage
110V
120V*
Output Voltage
220V
230V*
240V
*Default position
1.
Connect the USB cable to the USB port on the UPS rear panel.
Connect the other end of the USB cable to the USB port on
your computer.
2.
Install the LanSafe software and USB drivers according to the
instructions provided with the Powerware Software Suite CD.
5115 Tower UPS (500–1400 VA) User's Guide
120V Models
Input Voltage
DIP Switch 1
Range
99V-116V
108V–127V*
230V Models
Input Voltage
DIP Switch 1
Range
198V–233V
207V–243V*
216V–254V
USB Port
Figure 13. The USB Port
05146640 Rev C www.powerware.com
S
DIP Switch 2
ON
OFF/ON
OFF
OFF/ON
DIP Switch 2
ON
OFF
OFF
OFF/ON
ON
ON
Hide quick links:
Advertisement
Table of Contents
