Figure 9-23. System Setup Level 1 Screen - Powerware 9390 Installation & Operation Manual

Using the Control Panel
The System Setup Level 1 screen can be used to set the UPS date and time, the serial ports,
change the Level 1 password, and log out of Level 1. In addition, the Level 0 functions are
available. Figure 9-23 shows the System Setup Level 1 screen.
Use the
SELECT pushbutton to display the function screen.
The Level 1 screen times out after 60 minutes or can be logged out at any time by
selecting the LOG OUT function from the menu screen.
9-18
or pushbuttons to highlight the setup function screen desired, then press the
SYSTEM SETUP LEVEL 1
LOG OUT
ENTER PASSWORD
CHANGE PASSWORD
ENTER PASS-
CONTRAST ADJUST
WORD
VERSIONS
UNIT TYPE

Figure 9-23. System Setup Level 1 Screen

Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C
®
SELECT