Figure 8-22. Serial Port Setup Screen - Powerware 9390 Installation & Operation Manual

Select COM PORT SETUP from the System Setup Level 1 menu to display the Serial Port
Setup screen. This screen allows selection of the serial COM port to set up. Figure 8-22
shows the Serial Port Setup screen.
Use the
SELECT pushbutton. To return to the System Setup screen, press the
Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®
or pushbuttons to highlight the the COM port to be set up, then press the
COM PORT SETUP
COM 1
COM 2
COM 3

Figure 8-22. Serial Port Setup Screen

Using the Control Panel
pushbutton.
SELECT
8-19