Unit Meter Screens; Figure 9-6. Unit Output Meter Screen - Powerware 9390 Installation & Operation Manual

Using the Control Panel

9.2.3 Unit Meter Screens

The Unit Meter screens show the UPS meter readings for the unit (or units, if a parallel
system is installed).
Press the METERS pushbutton on the main menu bar to display the Unit Meter screens.
Figure 9-6 through Figure 9-10 show the Unit Meter screens.
To scroll through the meter screens, press the
current UPS readings are displayed in the information area of the screen.
NOTE
bar pushbutton selections are visible only when a parallel system is installed.
The Output screen shows output voltage (phase-to-neutral), output current (each phase),
and frequency being supplied by the UPS, as well as the kVA, kW, and power factor
measurements.
V1
***
I1
***
9-6
The UNIT designation after the meter type, and the SYSTEM and UNIT menu
OUTPUT --- UNIT
V2 V3
*** ***
I2 I3
*** ***

Figure 9-6. Unit Output Meter Screen

Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C
®
or pushbuttons on the menu bar. The
KVA KW
*** ***
FREQ
PF
***
***
SYSTEM UNIT
LEAD