Door Section Identification - Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual

Package Contents Continued...
(2) 3/8"- 16 1/4"- 20 fLANGED hEx (2) #10 PhILLIPS
1/4"- 14 x 5/8" SELf TAPPING
1/4"- 20 hEx NuTS (2) 1/4"- 20 x 5/8"
NuTS (AS REquIRED) hEAD SCREWS
hEx NuTS
(LIfT hANDLE) SCREWS (AS REquIRED)
TAMPER-RESISTANT
SCREWS
(2) 3/8"- 16 x 3/4"
1/4"- 20 x 5/8"
1/4"- 20 x 7/8" SELf DRILLING
5/16" x 2" hEx hEAD LAG SCREWS
hEx hEAD BOLTS
CARRIAGE BOLTS
SCREWS (AS REquIRED)
(AS REquIRED)
(AS REquIRED)
(2) #8 x 1-5/8" SELf TAPPING SCREWS
(2) 1/4" x 2-1/2" CARRIAGE BOLTS (LIfT hANDLE)
1/4"-20 x 11/16" SELf DRILLING
(STEP PLATE)
SCREWS (AS REquIRED)

Door Section Identification

The bOTTOM SECTION can be
Tools Needed:
TOP SECTION
identified by the factory attached
bottom astragal and the bottom bracket
warning labels on each end stile. This
section is always the 1st section on
four and five section doors.
INTERMEDIATE II SECTION (5 SECTION DOORS ONLy)
The lOCk SECTION may have a yellow
and black warning label on the right
side of the section. This section is
WARNING LABEL
always the 2nd section on four and five
section doors.
INTERMEDIATE I SECTION
The INTERMEDIATE I SECTION may
have a warning label attached to either
right or left hand endstile of the section.
This section is always the 3rd section
from the bottom of the door.
The INTERMEDIATE II SECTION is
LOCk SECTION
always the 4th section on five section
door.
BOTTOM BRACkET
The TOP SECTION is always the 4th
WARNING LABELS
section on four section door and the 5th
section on five section door.
BOTTOM SECTION
ASTRAGAL
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com